A week ago I was contacted by Lydia of WOMWorld.com/nokia who asked me if I would be interested in receiving an indestructible box. I was told that she found me via my twitter profile and felt it would appeal to my passions. After confirming the email was not spam I replied, intrigued, “yes please” and sent her my address.

Yesterday it arrived. I opened the door to a delivery man who offered me a large cardboard box. Jof had suggested to me that it would likely be an N900 (which I had heard a little about but had not had time to look into) so I was expecting a small package. Surprised I was when the box the man handed me was so large and heavy – 35x35x35cm and 7.5kg!

I took it indoors and opened it, to find a large package, cold to the touch, wrapped up in brown parcel paper and surrounded by polystyrene balls. Unwrapping this (and making a hell of a mess with the styrofoam balls which attempted to mirror the snow outside onto my living room floor) unveiled a 25x25x25cm black shiny box with a Nokia logo on top, a hinge and a small USB mini-B socket barely visible on one side. It was obvious that the top would open… but how?

I wanted to attempt to hack it right away, but two things stopped me: firstly, I should be working; and secondly the box was wet with condensation from the sudden contrast with the cold outside. I went back to work.

A hour and a half later I got temporarily stumped with a programming problem and decided to attempt to hack the box.

My first step was to see what happened when I plugged it in to the USB. I booted into Ubuntu 9.10, ran dmesg -c to clear all the kernel messages, plugged it in, waited a few seconds, and ran dmesg again to see just the new logs:

[  314.544034] usb 6-2: new full speed USB device using uhci_hcd and address 2
[  314.747104] usb 6-2: configuration #1 chosen from 1 choice
[  314.811722] usbcore: registered new interface driver usbserial
[  314.811734] USB Serial support registered for generic
[  314.811764] usbcore: registered new interface driver usbserial_generic
[  314.811766] usbserial: USB Serial Driver core
[  314.823161] USB Serial support registered for FTDI USB Serial Device
[  314.823263] ftdi_sio 6-2:1.0: FTDI USB Serial Device converter detected
[  314.823283] usb 6-2: Detected FT232RL
[  314.823285] usb 6-2: Number of endpoints 2
[  314.823287] usb 6-2: Endpoint 1 MaxPacketSize 64
[  314.823289] usb 6-2: Endpoint 2 MaxPacketSize 64
[  314.823291] usb 6-2: Setting MaxPacketSize 64
[  314.825064] usb 6-2: FTDI USB Serial Device converter now attached to ttyUSB0
[  314.825077] usbcore: registered new interface driver ftdi_sio
[  314.825079] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver

I spotted the /dev/ttyUSB0 and instantly thought “minicom.” It took me a while to refamiliarise myself with the program and get it to connect, but soon I had fiddled with the speed settings (reduced it to just 9600baud from 115200) and was greeted the following output on my screen:

  _   _  ___  _  _____    _
 | \ | |/ _ \| |/ /_ _|  / \
 |  \| | | | | ' / | |  / _ \
 | |\  | |_| | . \ | | / ___ \
 |_| \_|\___/|_|\_\___/_/   \_\
 *******************************
    W3lc0m3 t0 n0k14 h4x0rb0x!
 *******************************                                               

 ? - displays help dialog                                                      

$-nokia h4x0rb0x->

Unfortunately I could not type into minicom. I experimented with the speed and parity settings some more (as they had helped before) but no use. Finally I disabled hardware flow control and voilà I could type. Then it was simply a case of typing “?” to find out what commands were available:

$-nokia h4x0rb0x-> ?
Available commands:                                                            

 ? - prints this help dialog                                                    

 connecting <argument> - opens box                                              

$-nokia h4x0rb0x->

And guessing what the argument to the nokia connecting command was…

$-nokia h4x0rb0x-> connecting people                                            

Initiation complete.                                                            

Start Connecting.                                                               

$-nokia h4x0rb0x->

Hardly a challenge! A nice clichéd progress bar appeared for a few seconds and then *click* the lid popped open a little. I opened it fully and was pleased to see that they had even included dry ice to maximise theatrics, with the N900 packed safely waiting to be admired.

They really put a lot of thought into this! I delved deeper and here are all of my winnings:

That’s: an N900 with accessories plus a butane soldering iron, sports band, cake, and a little fox figurine.

The box itself was powered by a Roboduino Nano (which I intend to repurpose later… not sure what as yet) hooked up to a solenoid:

UPDATE: Techcrunch have a video of the opening – check it out!

Continue reading:
Part 2: N900: first impressions
Part 3: N900: a phone for hackers? (coming soon…)